Most property owners don't start by choosing a trade. They start with an inspection report. Your QEWI's findings identify the defects, and the repair scope determines what happens next. Local Law 11 Brooklyn handles brickwork, lintels, parapets, stone restoration, fire escapes and temporary access systems under one coordinated construction plan.
Match the finding in your report to the relevant service below. If your report identifies a defect that isn't listed, send it to us for a review of the construction scope.
Cracked bricks, eroded mortar and displaced masonry can allow water into older walls. We repoint joints, replace damaged units and address unstable sections according to the required scope.
Explore Brick & Masonry RepairSteel lintels support masonry above windows and doors. Corrosion can cause the metal to expand, cracking the surrounding brickwork and allowing moisture inside. We repair or replace affected lintels and restore the adjoining masonry as required.
Explore Lintel Repair & ReplacementParapets and coping stones face repeated exposure to rain, wind and temperature changes. Failed joints, loose units and damaged surfaces can allow water penetration or create falling-material hazards. We repair deteriorated sections and address the joints and materials.
Explore Coping & Parapet RestorationBrownstone, limestone, cast stone, terra cotta and decorative cornices require methods suited to the existing material. We address damaged components and deteriorated joints while considering the building's architectural details.
Explore Stone RestorationCorroded steel, loose connections, damaged stairs and failing protective coatings require appropriate assessment and corrective work. Our services include metal repairs and protective painting where suitable. We can also address construction items identified during property maintenance.
Explore Fire Escape ServicesWhen an exterior condition requires pedestrian protection, the appropriate temporary structure may need to be installed while repairs are planned. We coordinate access arrangements and construction sequencing around the agreed scope.
Explore Scaffolding & Sidewalk ShedsSpalling, cracking and exposed reinforcing steel can compromise concrete surfaces and balcony edges. We repair affected areas according to the extent of deterioration and the specified construction requirements.
Failed sealants, flashing and membranes can allow water through windows, joints and roof transitions. We address the relevant waterproofing components to reduce moisture entry and protect adjacent materials.
Damaged slab edges, deteriorated concrete and railing connections require attention to both the affected materials and safe use. We undertake specified repairs to balcony components based on the project's condition assessment and scope.
Cracked, loose or delaminated stucco can indicate surface deterioration or moisture behind the finish. We repair affected areas and restore the surface using methods suited to the existing assembly.
Local building conditions influence repair methods, access arrangements and scheduling. Identifying these constraints early helps establish a realistic scope.
Historic districts can impose additional requirements on visible exterior alterations and replacement materials. Check the New York City Landmarks Preservation Commission's applicable district guidance and confirm whether approvals are needed before work begins. We account for these considerations when planning the construction scope.
Narrow sidewalks, active storefronts, tight alleys and adjoining buildings affect equipment placement and material deliveries. We assess site access before preparing an estimate so the proposed setup reflects actual working conditions.
Temperature, precipitation and freeze-thaw cycles can affect mortar, coatings and other exterior materials. Scheduling around suitable installation and curing conditions helps avoid preventable delays and poor application conditions.
Start with your QEWI's report. The findings identify the defects and their classifications, while your qualified professional can explain the required priorities. Conditions presenting immediate hazards need prompt attention, followed by other repairs according to the applicable requirements.
Yes. When the scope allows, we can coordinate multiple trades under one construction plan. Combining related work may reduce duplicated access arrangements and make scheduling easier.
Yes. We offer these services as part of larger exterior projects or as separate scopes where appropriate. The estimate depends on the affected materials, quantities, access and repair requirements.
Partial work may be possible, depending on the approved scope, safety considerations and project requirements. Where a QEWI or design professional is involved, confirm the proposed phasing with them before proceeding.
We consider immediate safety concerns, the condition of affected materials, water penetration and the requirements in the project scope. Your QEWI determines the technical classification and applicable inspection requirements.
Yes. We provide free estimates after reviewing the available report and project information or assessing the property, as appropriate.
Send us your QEWI's findings or tell us what needs attention. We'll review the available information, identify the relevant construction services and provide a written estimate for the proposed work.
Send us your QEWI's findings or tell us what needs attention. We'll review the available information, identify the relevant construction services and provide a written estimate.
Ready to discuss your project?
Contact UsEstimates are subject to the available project information and any necessary site assessment.